TrailBlazer 2WD V8-5.3L (2007)
2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
3. Remove the bracket assembly from the seat cushion.
Installation Procedure
1. Position the bracket assembly on the seat cushion.
Notice: Refer to Fastener Notice.
2. Install the 2 bolts securing the bracket assembly to the seat cushion.
Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).
3. Install the rear seat cushion assembly in the vehicle.
Rear Seat Cushion Cover and Pad Replacement
Rear Seat Cushion Cover and Pad Replacement
Tools Required
J 36796 Clip Removal Tool
Removal Procedure