TrailBlazer 2WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
3. Install the master cylinder mounting nuts.
Tighten the master cylinder mounting nuts to 36 N.m (27 lb ft).
4. Remove the rubber plugs from the brake lines.
5. Connect the brake pipes.
Tighten the brake pipe fittings to 32 N.m (24 lb ft).
6. Connect the master cylinder fluid level sensor connector.
7. Bleed the hydraulic brakes system. Refer to Hydraulic Brake System Bleeding (Manual) Hydraulic Brake System Bleeding (Pressure).
Master Cylinder Overhaul
Master Cylinder Overhaul
Caution: Refer to Brake Fluid Irritant Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Disassembly Procedure