TrailBlazer 2WD V8-5.3L (2007)
3. Holding the lower end of the shoe (2) away from the backing plate, slide the shoe down, over the top of the hold down spring (3).
4. Place the lower end of the shoe (2) against the backing plate.
5. Slide the shoe (2) up and under the hold down spring (3).
6. Inspect the position of the shoe assembly. The shoe must be central on the backing plate and with both tips located in the slots of the actuation
mechanism (1).
7. Manually check the park brake for proper operation by moving the park brake actuator lever and observing the movement of the actuation
mechanism.
8. Install the park brake cable to the park brake lever.
9. Adjust the park brake shoe. Refer to Park Brake Adjustment.
10. Install the brake rotor.
11. Install the brake caliper and mounting bracket. Refer to Rear Brake Caliper Bracket Replacement.
12. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
13. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.