TrailBlazer 2WD V8-5.3L (2007)
2. Remove the air temperature actuator-right retaining screws.
3. Disconnect the air temperature actuator-right electrical connector.
4. Remove the air temperature actuator-right.
Installation Procedure
1. Install the air temperature actuator-right.
Notice: Refer to Fastener Notice.
2. Tighten the air temperature actuator-right retaining screws.
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the air temperature actuator-right electrical connector.
4. Install the I/P carrier.
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Actuators Recalibration (Primary).
See: Testing and Inspection/Programming and Relearning
Air Temperature Actuator Replacement - Left Side
Air Temperature Actuator Replacement - Left Side
Removal Procedure
1. Remove the I/P carrier.
2. Remove the air temperature actuator-left (1) retaining screws.
3. Disconnect the air temperature actuator-left electrical connector.
4. Remove the air temperature actuator-left.
Installation Procedure
