chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 3475 > < Underhood Electrical Center or Junction Block Replacement

TrailBlazer 2WD V8-5.3L (2007)

Page 2
background image

7. Remove the junction block bracket retaining bolts (1) and remove the junction block bracket from the vehicle.

INSTALLATION PROCEDURE

1. NOTE:  Refer to Fastener Notice.

Position the junction block bracket and install the bolts (1).

Tighten the junction block bracket bolts to 6 N.m (53 lb in).

2. Align the wiring harnesses and install the fuse relay center.

Underhood Electrical Center or Junction Block Replacement|Page 3475 > < Underhood Electrical Center or Junction Block Replacement