chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Ride Height Sensor, Suspension Control > < Air Suspension Compressor Assembly C1|Page 15179
Page 3
background image

Tighten the bolts to 20 N.m (15 lb ft).

5. Lower the vehicle.
6. Install the air suspension system fuse.
7. Start the vehicle and run for approximately 1 minute to ensure that the air spring leveling system is functioning properly.
8. Inspect D-height. Refer to Trim Height Inspection.
9. Inspect for leaks. If a leak is found at the air supply lines connections at the air spring compressor, replace the air supply lines. Refer to Air 

Suspension Air Line Replacement.

Ride Height Sensor, Suspension Control > < Air Suspension Compressor Assembly C1|Page 15179