chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - Valve Body Reconditioning|Page 12418 > < A/T - Valve Body Reconditioning|Page 12416
Page 3
background image

13. Inspect the transmission fluid pressure manual valve position switch assembly for the following conditions:

^

Damage

^

Debris

^

Damaged or missing O-rings

^

Cracked connector

^

Loose electrical terminals

^

Poor terminal retention

14. Remove the manual detent spring retaining bolt.

15. Remove the manual detent spring.
16. Inspect the manual detent spring for cracks or damage.

Important: Keep the control valve body level when lowering it from the vehicle. This will prevent the loss of checkballs located in the
control valve body passages.

17. Remove the remaining control valve body bolts.

A/T - Valve Body Reconditioning|Page 12418 > < A/T - Valve Body Reconditioning|Page 12416