chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Drive Pinion Flange/Yoke and/or Oil Seal Replacement|Page 12529 > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement|Page 12527
Page 3
background image

The lubricant level should be between 0-13 mm (0-0.5 inch) below the fill plug opening.

6. If the level is low, add lubricant until the level is even with the bottom of the fill plug opening. Use the proper fluid, refer to Fluid and Lubricant

Recommendations.

7. Lower the vehicle.

Drive Pinion Flange/Yoke and/or Oil Seal Replacement|Page 12529 > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement|Page 12527