TrailBlazer 2WD V8-6.0L (2009)
2. Remove the air temperature actuator-left (1) retaining screws.
3. Disconnect the air temperature actuator-left electrical connector.
4. Remove the air temperature actuator-left.
Installation Procedure
1. Install the air temperature actuator-left (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the air temperature actuator-left retaining screws.
Tighten the screws to 1.9 Nm (17 lb in).
3. Connect the air temperature actuator-left electrical connector.
4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Actuator Recalibration (See: Testing
and Inspection/Programming and Relearning).