TrailBlazer 2WD V8-6.0L VIN H (2006)
4. Remove the sight shield retainer bolts and the retainer, if required.
5. Remove the sight shield ball stud, if required.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the sight shield ball stud, if required.
^
Tighten the stud to 5 Nm (44 inch lbs.).
2. Position the sight shield retainer to the intake manifold and install the bolts, if required.
^
Tighten the bolts to 5 Nm (44 inch lbs.).