TrailBlazer 4WD L6-4.2L VIN S (2002)
7. Align the hinge (1) and the backing plate (2) with the holes in the door (3).
8. Hand tighten the 4 supplied bolts (4).
Notice: Refer to Fastener Notice in Service Precautions.
9. Align the hinge to the original scribe location.
Tighten the bolts to 25 N.m (18 lb ft).
10. Clean and prepare all bare-metal surfaces.
11. Apply a full-bodied caulk around the service hinge.
12. Refinish as necessary.
13. Install and align all of the related panels and components.
