Chevrolet Workshop Service and Repair Manuals

Glove Compartment: Service and Repair

DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE

1. Remove the right closeout/insulator panel.
2. Remove the 3 storage compartment retaining screws.
3. Remove the storage compartment from the IP.

INSTALLATION PROCEDURE

1. Position the storage compartment to the IP.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the 3 screws.

Tighten
Tighten the screws to 2.5 N.m (22 lb in).

3. Install the right closeout/insulator panel.