chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 13569 > < Procedures|Page 13567
Page 6
background image

INSTALLATION PROCEDURE

1. With the aid of an assistant, install the headliner into the vehicle.
2. If the vehicle is equipped with a sunroof, partially raise the headliner and connect the sunroof assembly electrical connector.

3. With the aid of an assistant, fully raise the headliner and ensure that the retaining strips (1) are engaged, and the headliner harnesses (4) hang free

of the headliner.

4. Install the assist handles to the roof panel.
5. Install the right rear push pin (2)
6. Install the left rear push pin (3).
7. Install the sunshades to the headliner.
8. Install the left and right sunshade retaining clips (5).

Tighten
Tighten the sunshade retaining clip screws to 10 N.m (88 lb in).

Procedures|Page 13569 > < Procedures|Page 13567