TrailBlazer 4WD L6-4.2L VIN S (2002)
Radiator Support: Service and Repair
Brace Replacement - Radiator Support Diagonal
Removal Procedure
1. Remove the radiator air intake baffle.
2. Remove the headlamp housing panel.
3. Remove the hood latch support.
4. Remove the bolts that retain the battery tray brace to the body.
5. Remove the battery tray brace from the vehicle.
6. Remove the bolts that retain the radiator support diagonal brace to the radiator support.
7. Remove the radiator support diagonal brace from the vehicle.
Installation Procedure
1. Install the radiator support diagonal brace to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the radiator support diagonal brace to the radiator support.
Tighten the radiator support diagonal brace to 25 N.m (18 lb ft).