TrailBlazer 4WD L6-4.2L VIN S (2002)
15. Install the 4 retaining nuts to the studs on the underside of the cushion.
Tighten
Tighten the nuts to 25 N.m (18 lb ft).
16. Install the 3 seat switch bezel screws.
Trailblazer, Envoy, and Bravada
TOOLS REQUIRED
J 36796 Clip Removal Tool
REMOVAL PROCEDURE
1. Remove the seat cushion from the vehicle.
2. Remove the seat cushion bracket.
3. Remove the seat latch bezels.
4. Use the J 36796 to remove the push pins (1) on the underside of the seat bottom, in order to start the seat cushion removal procedure.