TrailBlazer 4WD L6-4.2L VIN S (2002)
4. Inspect the oil pan alignment. Use a straight edge on the back of the block and the oil pan transmission mounting surface.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil pan bolts.
^
Tighten the oil pan side bolts to 25 Nm (18 ft. lbs.).
^
Tighten the oil pan end bolts to 10 Nm (89 inch lbs.).
6. Install the 4 transmission bell housing bolts that attach to the oil pan.
^
Tighten bolts to 47 Nm (35 ft. lbs.).
7. Install the A/C compressor 2 bottom bolts (4).
^
Tighten all 4 bolts to 50 Nm (37 ft. lbs.).
8. Install the front differential bolts.
^
Tighten the front differential bolts to 85 Nm (63 ft. lbs.).
9. Install the front drive axle, clutch fork assembly.