TrailBlazer 4WD L6-4.2L VIN S (2002)
IMPORTANT: The upper windshield reveal molding (1) fills the cavities between the body and windshield.
12. If the reveal molding is stretched or damaged it and cannot be reused it must be replaced.
13. Remove the windshield reveal molding.
Grasp the lower corner of the windshield reveal molding by hand and slowly pull the reveal molding away from the windshield.
14. If the windshield reveal molding will not release, use a utility knife in order to cut around the windshield in order to remove the windshield reveal
molding.
IMPORTANT: The windshield lower supports (1) have molded in locks with an adhesive strip (2) on the back side. Once the windshield lower stop
have been removed they must be replaced.
15. Remove the windshield lower supports (1) by using a flat bladed tool, lightly prying upward in the middle until it releases.
IMPORTANT: Keep the cutting edge of the tool against the window.