TrailBlazer 4WD V8-5.3L VIN M (2006)
Important: When performing the following service procedure, the front brake caliper assembly and the front brake caliper mounting bracket can
be removed as an assembly.
8. Remove the brake caliper and mounting bracket assembly.
9. Remove the retaining clips from the brake rotor.
Notice: Whenever the brake rotor has been separated from the wheel bearing flange, clean any rust or foreign material from the mating surface of
the rotor and flange with the J 42450 hub cleaning kit. Failure to do this may result in increased lateral runout of the rotor and brake pulsation.
Important: If the brake rotor is not going to be replaced but just removed from the front hub, mark the relationship of the brake rotor and a wheel
stud.
10. Remove the front brake rotor from the wheel hub.
