chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Interior Moulding / Trim|Carpet > < Radiator Lower Grille Replacement|Page 11769
Page 1
background image

Cargo Cover: Technical Service Bulletins
Interior - Cargo Screen Retainer Removal Procedure

INFORMATION

Bulletin No.: 09-08-110-022

Date: October 06, 2009

Subject: Proper Removal of Cargo Screen Retainers For Any Service Repairs Related to Quarter Lower Rear Trim Panel Removal

Models:

2008-2010 Buick Enclave
2009-2010 Chevrolet Traverse
2007-2010 GMC Acadia
2007-2010 Saturn OUTLOOK

The purpose of this bulletin is to provide detail regarding the proper removal of the cargo screen retainers for any related service repairs. Following the
information below will help eliminate the likelihood of breaking or damaging the quarter lower rear trim panels and/or retainers.

Tip

The cargo screen retainers are engaged to the quarter lower rear trim panel by two integral tabs.

Important
The illustration above shows one configuration example in which screws are located behind the cargo screen retainers and other trim covers.
Be sure to locate and remove all of these screws prior to attempting removal of the quarter lower rear trim panel.

To remove the cargo screen retainers:

-

Turn the left front (1) and right rear cargo screen retainer counterclockwise one quarter turn to disengage the two integral tabs.

-

Turn the left rear (2) and right front cargo screen retainer clockwise one quarter turn to disengage the two integral tabs.

Disclaimer

Interior Moulding / Trim|Carpet > < Radiator Lower Grille Replacement|Page 11769