Traverse FWD V6-3.6L (2009)
9. Remove the 4 vacuum booster nuts.
10. Position the vacuum brake booster and master cylinder assembly forward slightly to allow the brake pedal and bracket assembly to clear the
booster studs.
11. Remove the brake pedal assembly.
Installation Procedure
1. Position the brake pedal assembly to the dash panel.
2. Position the vacuum brake booster and master cylinder assembly to the dash panel.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 4 vacuum booster nuts.
Tighten the nuts to 25 Nm (18 lb ft).
