Traverse FWD V6-3.6L (2009)
1. Install the 2 BPMV insulators to the BPMV.
Denatured alcohol may be used as an assembly aid to install the insulators.
2. Install the lower BPMV insulator to the bracket.
Denatured alcohol may be used as an assembly aid to install the insulator.
3. Carefully install the BPMV to the bracket.
Denatured alcohol may be used as an assembly aid on the insulators to install the BPMV.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the 2 BPMV insulator washers and the 2 nuts.
Tighten the nuts to 8 Nm (71 lb in).