Traverse FWD V6-3.6L (2009)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Bracket Replacement
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair).
2. Release the front and rear brake pipes (1) from the routing clip on the frame rail.
3. Remove the 2 brake pressure modulator valve (BPMV) bracket nuts (2).
4. Remove the 2 BPMV nuts and washers.
Note: Carefully separate the BPMV from the bracket. Do not pry on the accumulator covers on the underside of the BPMV.