Traverse FWD V6-3.6L (2009)
3. Disconnect the front park brake cable (1) from the rear park brake cable.
4. Using the J 37043 , remove the front park brake cable from the park brake cable bracket on the body by compressing the locking tabs on the
cable conduit (2).
5. Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Acadia) (See: Body
and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel Replacement - Left Side
(Enclave) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel
Replacement - Left Side (OUTLOOK) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
)Instrument Panel Insulator Panel Replacement - Left Side (Traverse) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
6. Remove the driver side front carpet retainer. Refer to Front Side Door Opening Floor Carpet Retainer Replacement (See: Body and
Frame/Interior Moulding / Trim/Carpet/Service and Repair).
7. Remove the 2 nuts and the driver footrest.
8. Lift the driver floor carpet to expose the front park brake cable routing clip.
9. Release the park brake cable routing clip from the floor stud.