Traverse FWD V6-3.6L (2009)
5. Position the park brake cable routing clip to the floor stud.
6. Position the driver floor carpet to the vehicle floor.
7. Install the driver footrest.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Install the 2 driver footrest nuts.
Tighten the nuts to 10 Nm (89 lb in).
9. Connect the park brake warning indicator switch electrical connector.
10. Install the driver side front carpet retainer. Refer to Front Side Door Opening Floor Carpet Retainer Replacement (See: Body and Frame/Interior
Moulding / Trim/Carpet/Service and Repair).
11. Install the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Acadia) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel Replacement - Left Side
(Enclave) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel
