Traverse FWD V6-3.6L (2009)
2. Connect the park brake cable eyelet (1) to the park brake actuator.
3. Compress the park brake cable spring and install the park brake cable to the cable bracket (2).
Ensure the locking tabs on the cable conduit are fully engaged to the cable bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the 2 park brake cable bracket bolts.
Tighten the bolts to 10 Nm (89 lb in).
5. Install the park brake cable to the cable guides.
6. Position the park brake cable to the equalizer.