Traverse FWD V6-3.6L (2009)
3. If necessary, apply the park brake pedal until the clevis exposes the lower park brake pedal assembly mounting stud.
4. Install the lower park brake pedal nut (1).
Tighten the nut to 10 Nm (89 lb in).
5. Release the park brake pedal.
6. Connect the front park brake cable to the park brake pedal clevis (1).
7. Install the front park brake cable to the park brake pedal assembly.
Ensure the locking tabs on the cable conduit (2) are fully engaged to the park brake pedal assembly.
8. Connect the park brake warning indicator switch electrical connector.
9. Install the driver side front carpet retainer. Refer to Front Side Door Opening Floor Carpet Retainer Replacement (See: Body and Frame/Interior
Moulding / Trim/Carpet/Service and Repair).
10. Install the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Acadia) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel Replacement - Left Side
(Enclave) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel
Replacement - Left Side (OUTLOOK) (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
