Traverse FWD V6-3.6L (2009)
5. Use the EN 46104 - tool in order to retain the water pump pulley.
6. Install the water pump pulley bolts and tighten to 10 Nm (89 lb in).
7. Install the right engine strut mount. Refer to Engine Mount Strut Replacement - Right Side (See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Engine Mount/Service and Repair).
8. Install the right engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side (See: Engine/Drive Belts, Mounts,
Brackets and Accessories/Engine Mount/Service and Repair).
9. Install the drive belt. Refer to Drive Belt Replacement (See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair).
10. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair)Cooling System Draining and Filling
(Vac N Fill) (See: Service and Repair).