Traverse FWD V6-3.6L (2009)
2. Place the oil filter adapter into position.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the oil filter adapter bolts. Ensure the longer bolts (1) is installed in the upper rear position and tighten to 23 Nm (17 lb ft).
4. Install a NEW oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair).
5. Install the generator. Refer to Generator Replacement (See: Starting and Charging/Charging System/Alternator/Service and Repair).
