Traverse FWD V6-3.6L (2009)
5. Loosely install the oil pan bolts.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Tighten the oil pan bolts in sequence shown.
1. Tighten the 8 mm bolts (1-11) to 23 Nm (17 lb ft).
2. Tighten the 6 mm bolts (12, 13) to 10 Nm (89 lb in).
7. Install the engine front cover. Refer to Engine Front Cover Installation (See: Service and Repair/Overhaul).
8. Install the engine. Refer to Engine Replacement (See: Service and Repair/Removal and Replacement/Engine Replacement).
9. Install the exhaust flexible pipe. Refer to Exhaust Flexible Pipe Replacement (See: Exhaust System/Exhaust Pipe/Service and Repair).
10. Refill the engine oil. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair).