chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Exhaust Manifold Lower Heat Shield Replacement|Page 2862 > < Exhaust Manifold Lower Heat Shield Replacement|Page 2860

Traverse FWD V6-3.6L (2009)

Page 3
background image

3. Connect the engine wiring harness electrical connector (2) to the HO2S electrical connector (3).
4. Install the HO2S electrical connector retainer to the wiring harness clip (1).
5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement   (See: Powertrain Management/Fuel Delivery and Air

Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).

Exhaust Manifold Lower Heat Shield Replacement|Page 2862 > < Exhaust Manifold Lower Heat Shield Replacement|Page 2860