Traverse FWD V6-3.6L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Install the oil pan drain plug (1).
Tighten the drain plug to 20 Nm (15 lb ft).
Installation Procedure
1. Lower the vehicle.
2. Lubricate the NEW oil filter gasket with clean engine oil.
3. Tighten the oil filter.
Tighten the filter to 30 Nm (22 lb ft).
4. Refill the engine oil. Refer to Approximate Fluid Capacities (See: Service Intervals).
5. Start the engine and inspect for leaks.