Traverse FWD V6-3.6L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Fluid Reservoir Outlet Hose Replacement
Power Steering Fluid Reservoir Outlet Hose Replacement
Removal Procedure
1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.
4. Disconnect the power steering fluid reservoir outlet hose (1) from the remote power steering fluid reservoir.
5. Disconnect the power steering fluid reservoir outlet hose (1) from the power steering pump.