Traverse FWD V6-3.6L (2009)
4. Install the exhaust flexible pipe. Refer to Exhaust Flexible Pipe Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair).
5. Install the catalytic converter to exhaust manifold nuts (1).
Tighten the nuts to 50 Nm (37 lb ft).
6. Install the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side (See: Engine, Cooling and
Exhaust/Exhaust System/Heat Shield/Service and Repair/Exhaust Manifold Heat Shield Replacement - Left Side).