Traverse FWD V6-3.6L (2009)
Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service
Metal Collar Quick Connect Fitting Service
Special Tools
J 37088-A - Fuel Line Disconnect Tool Set
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel/Service Precautions).
1. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief (With CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and
Repair/Fuel Pressure Relief (With CH-48027))Fuel Pressure Relief (Without CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and
Repair/Fuel Pressure Relief (Without CH-48027)).
2. Remove the fuel feed line quick connect fitting retainer.
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel/Service Precautions).
Caution: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution (See: Emission Control Systems/Evaporative
Emissions System/Service Precautions).
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from the J 37088-A - Tool Set for the size of the fitting. Insert the tool into the female connector, then push inward in
order to release the locking tabs.
