Traverse FWD V6-3.6L (2009)
Fuel Filler Hose: Service and Repair
Filler Tube Replacement
Removal Procedure
Warning
Do not allow smoking or the use of open flames in the area where work on the fuel or EVAP system is taking place. Anytime work is being done on the
fuel system, disconnect the negative battery cable, except for those tests where battery voltage is required.
1. Remove the fuel fill cap.
2. Remove the fuel tank fill pipe housing to fuel tank fill pipe bolts (1).
3. Drain the fuel tank. Refer to Fuel Tank Draining (See: Service and Repair).
4. Remove the left rear wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
5. Remove the left rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair).
6. Remove the fuel tank fill pipe bracket bolt (2).
7. Remove the fuel tank fill pipe assembly (3) from the vehicle.
