Traverse FWD V6-3.6L (2009)
1. Position a NEW throttle body gasket (1) and throttle body (2) to the upper intake manifold.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the throttle body bolts (3).
Tighten the bolts to 10 Nm (89 lb in).
3. Connect the engine wiring harness electrical connector (2) to the electronic throttle control (1).
4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair).
5. Perform the throttle learn procedure. Refer to Throttle Learn (See: Computers and Control Systems/Testing and Inspection/Component Tests and
General Diagnostics/Throttle Learn).