Traverse FWD V6-3.6L (2009)
1. Install the battery negative cable extension cable to the engine compartment.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the battery negative cable extension cable ground bolt (1) to the left wheelhouse panel upper reinforcement.
Tighten the bolt to 58 Nm (43 lb ft).
3. Install the battery negative cable extension cable clip (3) to the left upper engine compartment support bracket.
4. Install the battery negative cable extension cable clip (4) to the front compartment side rail.