Traverse FWD V6-3.6L (2009)
Installation Procedure
1. Position the negative battery cable to the battery box. (battery shown removed for clarity).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the negative battery cable ground bolt (2).
Tighten the bolt to 25 Nm (18 lb ft).
3. Connect the body wiring harness electrical connector (4) to the negative battery cable electrical connector (1).
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).