Traverse FWD V6-3.6L (2009)
3. Assemble the J 2619-01 and the CH-48107 .
4. Position the J 2619-01 and the CH-48107 lower control arm bushing.
5. Using the J 2619-01 and the CH-48107 , remove the front lower control arm bushing.
6. Using the J 5590 , remove the rear lower control arm bushing.
Installation Procedure
1. Position the front and rear bushings so that they are equally in the control arm.
2. Position the CH-48107 on the front bushing.
3. Using the vise, compress the front and rear bushings until they are seated.
4. Remove the lower control arm from the vise.
5. Remove the CH-48107 from the front bushing.
6. Install the lower control arm in the vehicle. Refer to Lower Control Arm Replacement (See: Service and Repair/Front Suspension).