Traverse FWD V6-3.6L (2009)
Warning: Refer to Glass and Sheet Metal Handling Warning (See: Body and Frame/Service Precautions/Technician Safety
Information/Glass and Sheet Metal Handling Warning).
Note: In order to remove the window out of the frame, carefully grasp and tilt the window toward the outer door panel. The window comes out
between the door panel and the window frame.
11. Remove the window (1) from the door.
Installation Procedure
1. With the regulator in the remove/load position, install the window (1) to the door.
1. Tilt the window forward and carefully guide the window into the rear channel.
2. Position the window to an upright position. Ensure that the window is seated into the channels.
3. Position the window (1) to a fully secure position into the upper door weatherstrip.
Note: Do not operate the regulator motor without supporting the window. Ensure that the window remains in the channels when operating the
