Traverse FWD V6-3.6L (2009)
10. With the aid of an assistant, dry fit the window (1) to the opening in order to determine the correct position.
11. Use masking tape in order to mark the locations (1) of the window (2) in the opening.
12. Cut the masking tape in the center and remove the window from the opening.
Note: Use care when applying glass prep clear #1 on the window. This primer dries almost instantly, and may stain the viewing area of the
window if not applied evenly.
13. Use a new dauber in order to apply glass prep clear #1 to the area approximately 10-16 mm (3/8-5/8 in) around the entire perimeter of the window
inner surface.
Immediately wipe the glass primed area using a clean, lint-free cloth.
14. Apply a second coat of the glass prep clear #1 to the same area of the glass.
