Uplander AWD V6-3.5L VIN L (2006)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Left Rear
The content of this article reflects the changes identified in TSB Bulletin No. #05-05-26-004 dated December 14, 2005.
Subject:
Revised Park Brake Cable Replacement - Left Rear (with IRS) and Park Brake Cable Replacement - Right Rear (with IRS)
Park Brake Cable Replacement - Left Rear
^
Tools Required
-
J 37043 Parking Brake Cable Release Tool
Caution: Refer to Park Brake Cable to Caliper Caution in Service Precautions.
Removal Procedure
1. Remove the left rear tire and wheel.
2. Remove the adjusting nut.
3. Remove the brake cable from the adjuster.
4. For vehicles equipped with ABS only, remove the speed sensor harness from the trailing arm.
5. Using the J 37043, remove the brake cable (1) from the trailing arm retaining bracket.