Uplander FWD V6-3.5L VIN L (2006)
Speaker: Service and Repair
Speaker Replacement - Rear
SPEAKER REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the liftgate trim panel.
2. Remove the rear radio speaker (1):
1. Push on the top tab.
2. Pull the speaker (1) from the liftgate (2).
3. Disconnect the electrical connector from the rear radio speaker.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the rear radio speaker.
2. Install the rear radio speaker (1):
1. Insert the tabs into the lower slots.
2. Push the upper tab into the slot on the liftgate (2).
3. Install the liftgate trim panel.
