Uplander FWD V6-3.5L VIN L (2006)
1. Align the rear impact bar to the frame rail.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the rear impact bar bolts to the frame rail.
Tighten the bolts to 50 N.m (37 lb ft).
3. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Pontiac) (See: Rear Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Rear Bumper (Pontiac))Fascia Replacement - Rear Bumper (Buick) (See: Rear Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Rear Bumper (Buick))Fascia Replacement - Rear Bumper (Chevrolet) (See: Front Bumper/Front Bumper Cover / Fascia/Service
and Repair/Fascia Replacement - Rear Bumper (Chevrolet)) .