Uplander FWD V6-3.5L VIN L (2006)
9. Remove the rear quarter trim panel retainers using J 38778 .
10. Feed the seat belts through the openings in the trim panel.
11. Remove the rear quarter trim panel from the vehicle.
Installation Procedure
1. Install rear quarter trim panel to vehicle.
2. Feed the seat belts through the openings in the trim panel.
3. Install the rear quarter trim retainers by aligning the retainer with the holes and then pushing the retainers to secure.
4. Install the upper cargo net retainers.
5. Install the liftgate sill plate. Refer to Door Sill Plate Replacement - Liftgate (See: Scuff Plate/Service and Repair) .
6. Install the seat belt anchor retaining bolts. Refer to Seat Belt Retractor Replacement - Rear (LWB w/RPO E59) and Seat Belt Retractor
Replacement - Rear (SWB).
7. Install the rear accessory panel by snapping in place.
