chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 15186 > < Air Deflector Replacement - Radiator (Buick)|Page 15181
Page 1
background image

Spoiler: Procedures

 

SPOILER REPLACEMENT - REAR (UPLANDER/MONTANA)

REMOVAL PROCEDURE

1. Remove the spoiler mounting screw access plugs.
2. Remove the spoiler mounting screws.
3. Remove the luggage carrier center mounting screws.
4. Lift up and support the spoiler at the luggage rails.
5. Remove the rear luggage carrier cross rail to spoiler screws.
6. Remove the spoiler from the roof.

INSTALLATION PROCEDURE

1. Align the spoiler to the roof panel.
2. Position the spoiler to the luggage carrier rails.
3. Install the rear luggage carrier cross rail to spoiler screws.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Remove the supports from under the luggage carrier rails.
5. Install the luggage carrier center mounting screws.

Tighten the luggage carrier center mounting screws to 6 N.m (53 lb in).

6. Install the spoiler mounting screws.

Tighten the screws to 6 N.m (53 lb in).

7. Install the spoiler mounting screw access plugs.

Procedures|Page 15186 > < Air Deflector Replacement - Radiator (Buick)|Page 15181