Uplander FWD V6-3.5L VIN L (2006)
Radiator Hose: Service and Repair
Radiator Inlet Hose Replacement
Radiator Hose Replacement - Inlet
^
Tools Required
-
J 38185 (SA9111E) Hose Clamp Pliers
Removal Procedure
Important: Use the J 38185 (SA9111E) to gently release tension on the hose clamp until the hose clamp lock feature engages allowing removal of
the hose.
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
2. Remove the left side diagonal brace.
3. Using the J 38185 (SA9111E), release tension on the hose clamp at the radiator until the clamp locks.
4. Remove the radiator inlet hose from the radiator.
5. Using the J 38185 (SA9111E), release tension on the hose clamp at the thermostat housing until the clamp locks.
6. Remove the radiator inlet hose from the thermostat housing.
Installation Procedure