Uplander FWD V6-3.5L VIN L (2006)
Control Assembly: Service and Repair
HVAC Control Module Replacement
HVAC CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) accessory trim plate.
2. Remove the HVAC control module bolts/screws.
3. Pull the HVAC control module straight out from the I/P.
4. Disconnect the HVAC control module electrical connectors.
INSTALLATION PROCEDURE
1. Connect the HVAC control module electrical connectors.
2. Install the HVAC control module into the I/P opening.
