Uplander FWD V6-3.5L VIN L (2006)
Heater Hose: Service and Repair
Heater Hose/Pipe Replacement - Inlet/Outlet
HEATER HOSE/PIPE REPLACEMENT - INLET/OUTLET
TOOLS REQUIRED
J 38185 (SA911E) Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
2. Release the quick connect.
3. Disconnect the inlet heater hose (1) at the engine.
4. Disconnect the outlet heater hose (2) at the engine.
5. Using the J 38185 or SA911E hose clamp pliers, disengage the inlet hose clamp at the module.