Uplander FWD V6-3.5L VIN L (2006)
6. Disconnect the shift lock actuator electrical connector (1).
7. Remove the shift lock actuator screws (3).
8. Remove the shift lock actuator (2) from the linear shift assembly.
Installation Procedure
1. Install the shift lock actuator (2) to the linear shift assembly.
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the shift lock actuator screws (3).
Tighten the screws to 2 Nm (18 inch lbs.).
3. Connect the shift lock actuator electrical connector (1).